Outlander 4WD L4-2.4L (4B12) (2008)
Slide the outer housing of the driver's air bag module connector in the arrow direction shown, and disconnect the connector.
[[D]] AIR BAG MODULE ASSEMBLY REMOVAL
WARNING:
-
The air bag module must not be measured with such equipment as an ohmmeter.
-
The air bag module must not be disassembled.
-
The removed air bag module should be stored in a clean, dry place with the deployment surface facing up.
Using t-type long torx wrench (T30), a torx screw is loosened completely and removed.
[[E]] STEERING WHEEL ASSEMBLY REMOVAL
Use special tool MB990803 to remove the steering wheel.
[[F]] CLOCK SPRING REMOVAL