Outlander 4WD L4-2.4L (4B12) (2008)
Repairs and Inspections Required After a Collision: Service and Repair
Seat Belt Systems
SEAT BELTS WITH PRE-TENSIONER
INSPECTION
WARNING:
-
If any component damage is found during the following inspection, replace the seat belt with pre-tensioner with a new one. Dispose of the
old one according to the specified procedure.
-
Never attempt to measure the circuit resistance of the seat belt pre-tensioner even if you are using the specified tester. If the circuit
resistance is measured with a tester, accidental seat belt pre-tensioner operation will result in serious personal injury.
1. Check seat belt pre-tensioner for dents, cracks or deformation.
2. Check the connectors for damage, the terminals for deformation, and the harness for binding.