Outlander 4WD L4-2.4L (4B12) (2008)
Ignition Switch: Component Tests and General Diagnostics
Check of Ignition Key Reminder Warning Function (Steering Lock Reminder Tone Alarm By KOS)
ON-VEHICLE SERVICE
CHECK OF IGNITION KEY REMINDER WARNING FUNCTION (STEERING LOCK REMINDER TONE ALARM BY KOS)
1. Driver's door: Release the closed and steering wheel lock, or turn the ignition key <vehicles with WCM> or emergency key <vehicles with KOS>
to the "LOCK" (OFF) position (key inserted).
2. Change the driver's door state from closed to open.
3. Check that the tone alarm sounds normally.
4. If a malfunction is found, carry out the troubleshooting. See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster /
Carrier/Testing and Inspection/Symptom Related Diagnostic Procedures/Trouble Symptom Chart
Inspection
INSPECTION
IGNITION SWITCH CONTINUITY CHECK
Ignition Switch Continuity Check
With the ignition switch mounted to the vehicle, disconnect and check the ignition switch connection connector.