Outlander 4WD L4-2.4L (4B12) (2008)
auto-tensioner.
2. Remove the generator drive belt.
[[B]] A/C COMPRESSOR ASSEMBLY REMOVAL
1. Remove the A/C compressor assembly from the A/C compressor bracket with the hose still attached.
2. Place the removed A/C compressor assembly where it will not be a hindrance when removing and installing the generator assembly, and secure it
with a cord or wire.
[[C]] GENERATOR ASSEMBLY REMOVAL
Move the A/C compressor assembly to one side, and then remove the generator assembly from under the vehicle.
INSTALLATION SERVICE POINT
]]A[[ GENERATOR ASSEMBLY INSTALLATION
1. Temporarily tighten the generator assembly to the generator bracket.
2. In accordance with the tightening order shown in the illustration, tighten the installation bolts for the generator bracket to the specified torque.
Tightening torque: 47 ± 11 Nm (35 ± 8 ft-lb)
DISASSEMBLY AND REASSEMBLY
[2.4L ENGINE]