Outlander 4WD L4-2.4L (4B12) (2008)
/Page-1095007.png)
2. Set the closed wrench to the hexagonal area of the special tool Serration socket (MB992226).
3. Insert the hexagonal bit socket having width across flats of 10 mm into the hexagonal area of the rotor shaft.
4. Hold the pulley with the closed wrench. Rotate the rotor shaft clockwise to remove the pulley.
[[B]] FRONT BRACKET REMOVAL[2.4L ENGINE]
CAUTION: Do not insert the screwdriver blades too deep. Doing so could damage the stator coil.
Insert the blades of screwdrivers between the front bracket and stator core, and pry and separate them with the screwdrivers.
[[C]] FRONT BRACKET ASSEMBLY REMOVAL[3.0L ENGINE]
CAUTION: Do not insert the screwdriver blades too deep. Doing so could damage the stator coil.
