Outlander 4WD L4-2.4L (4B12) (2008)
CAUTION: Inserting the glass adhesive knife too deeply into windshield adhesive may damage windshield.
4. Using glass adhesive knife
Keep glass adhesive knife at right angles with the windshield edge, and put the blade at windshield edge and surface. Then cut away adhesive
along the windshield edge.
5. Use special tool MB990480 to remove the windshield.
CAUTION:
-
Be careful not to remove more adhesive than is necessary.
-
Be careful also not to damage the paint on the body surface with the knife. If the paint is damaged, repair the damaged area with
touch-up paint.
6. Use a knife to cut away the remaining adhesive so that the thickness is within 2 mm (0.08 inch) around the entire circumference of the body
flange.
7. Finish the flange surfaces so that they are smooth.