Outlander AWD L4-2.4L (4B12) (2010)
Q: Is the wiring harness between joint connector (CAN1) C-103 and hands free module connector C-121 in good condition?
YES : Go to Step 43.
NO : Repair the wiring harness between joint connector (CAN1) C-103 and hands free module connector C-121.
STEP 43. Check the wiring harness between joint connector (CAN1) C-103 and A/C-ECU connector C-109 for open circuit.
CAUTION: Strictly observe the specified wiring harness repair procedure.
1. Disconnect joint connector (CAN1) C-103 and A/C-ECU connector C-109, and check the wiring harness.
2. Check the wiring harness between joint connector (CAN1) C-103 (terminal No.9) and A/C-ECU connector C-109 (terminal No.11)
OK: Continuity exists (2 ohms or less)
3. Check the wiring harness between joint connector (CAN1) C-103 (terminal No.22) and A/C-ECU connector C-109 (terminal No.12)
OK: Continuity exists (2 ohms or less)
Q: Is the wiring harness between joint connector (CAN1) C-103 and A/C-ECU connector C-109 in good condition?
YES (vehicles without MMCS) : Go to Step 44.
YES (vehicles with MMCS) : Go to Step 45.
NO : Repair the wiring harness between joint connector (CAN1) C-103 and A/C-ECU connector C-109.
STEP 44. Check the wiring harness between joint connector (CAN1) C-103 and radio and CD player or CD changer connector C-16 for open
circuit.
CAUTION: Strictly observe the specified wiring harness repair procedure.
1. Disconnect joint connector (CAN1) C-103 and radio and CD player or CD changer connector C-16, and check the wiring harness.