Outlander AWD L4-2.4L (4B12) (2010)
/Page-639005.png)
CAUTION
ECM Reprogramming
1. Conduct the following steps to reprogram the ECM.
a. Turn the ignition switch to the ON position. If the vehicle is equipped with the F.A.S.T. System, transmitter must remain in the vehicle for the entire
procedure.
b. If using MEDIC-II, from the main page, click the MUT-III STV icon at the top center of the screen.
c. Select "Special Function."
d. Select "ECU reprogramming."
