Outlander AWD V6-3.0L (6B31) (2011)
Sound Proofing / Insulation: Locations
Stiffener and Damp Sheet Application Locations
STIFFENER AND DAMP SHEET APPLICATION LOCATIONS
Spray-type stiffeners on the inner side of the side outer panel, sheet-type stiffeners on the inner side of the liftgate outer panel, and a damp sheet on the
interior side of the front deck have been used for higher surface rigidity.
NOTE:
-
The spray-type stiffener is mainly made from epoxy resin and contains filler. The sheet-type one is additionally reinforced with glass fiber. The
stiffener is cured by heating in the paint drying furnace during the production.
-
No spare part of the stiffener for repair is available in the field. If the stiffener is damaged, replace it together with the panel.
-
The spare part for the panel provided with the stiffener has a sheet-type stiffener affixed.