Pickup 2WD L4-155 2555cc 2.6L SOHC VIN E 2-bbl (1988)
Radio/Stereo: Service and Repair
The radio fuse box is located on the rear of the radio. If fuse is to be replaced it is necessary to remove the radio.
1.
Remove instrument cluster bezel. Refer to ``Instrument Cluster, Replace.''
2.
Remove radio bracket attaching screws, then remove radio bracket.
3.
Pull radio outward enough to gain access to rear of radio.
4.
Disconnect antenna lead wire and electrical connector, then remove radio.
5.
Reverse procedure to install.