Pickup 2WD L4-155 2555cc 2.6L SOHC VIN E 2-bbl (1988)
Headlamp Switch: Service and Repair
1.
Disconnect battery ground cable.
2.
Remove horn pad, then the steering wheel using suitable puller.
3.
Remove steering column shroud. On vehicles equipped with tilt steering, lower steering column to facilitate shroud removal.
4.
Disconnect switch electrical connectors.
5.
On Mirage models, remove switch attaching screws and unbend claws of switch.
6.
On all models, remove switch from steering column.
7.
Reverse procedure to install.
