Pickup 2WD L4-155 2555cc 2.6L SOHC VIN E 2-bbl (1988)
Axle Nut: Technical Service Bulletins
Axle Lock Washer - Not Reusable
SUBJECT:
LOCK WASHER USE ON RWD AXLES, MANUAL CHANGE
NO.
TSB-89-001
DATE June, 1989
MODEL Truck, Montero, Van/Wagon
SERVICE MANUAL UPDATE (1989 Montero shown, typical)
PURPOSE
TSB REVISION: 89-27-001
This bulletin is to inform you of a change in procedures when replacing a rear axle bearing. The lock washer used to retain the axle lock nuts is a
non-reuseable part. A new lock washer should always be used during reassembly. Make the change to the Service Manuals as shown below. As a
reference to this bulletin, please write the TSB number in the TSB Revision box at the bottom of the affected page.
AFFECTED SERVICE MANUALS
1983 Truck Service Manual
Page 3-8
1984, 1985, 1986 Truck Service Manual
Page 3-11
1987, 1988 Truck Service Manual
Page 3-19
1989 Truck Service Manual Volume 1
Page 3-14
1983, 1984, 1985, 1986 Montero Service Manual
Page 3-13
1987, 1988 Montero Service Manual Volume 1
Page 3-22
1989 Montero Service Manual Volume 1
Page 3-18
1987, 1988 Van/Wagon Service Manual Volume 1
Page 3-14
1989 Van/Wagon Service Manual Volume 1
Page 3-13