Pickup 2WD L4-2.0L SOHC (1983)
Starion
Ensure proper routing of the speedometer cable in the three areas as shown in the illustrations and that the curvature at the locations indicated by arrows
has a radius of 150 mm (6") or greater.
Truck
Ensure that the speedometer cable is routed as shown in the illustration and that the curvature at the locations indicated by arrows has a radius of 150 mm
(6") or greater.
All Models
If the above procedures fail to correct the condition, check the rubber bushing at the speedometer end of the speedometer cable, and if it is damaged or
deformed, replace the speedometer cable.
Lubrication
Mitsubishi speedometer cables are lubricated in production, however, when a chatter/noise condition exists, the speedometer end of the cable may be
lubricated using a very small amount of graphite spray or powder.
Warranty Considerations
Normal warranty procedures apply.