Pickup 2WD L4-2.3L DSL Turbo (1984)
1994-95 Galant Service Manual, Vol. 1, Pages 35B4 thru 35B-34. Circuit diagrams are in Vol. 2, Pages 156-161.
Data Link Connector Location: Under instrument panel near center. See page 35B-5.
Technical Service Bulletins:
1994-95 models:
TSB-95-35-001 Corrects resistance values for HU solenoid valve internal resistance on pages 35B-3, 13, and 33, Vol. 1 and circuit diagram callout on
page 256 in Vol. 2.
TSB-95-35-006 corrects procedural steps in Vol. 1, pages 35B-13 and 14.
TSB-95-35-008 provides corrective action, part numbers and warranty information for intermittent illumination of ABS warning light in cold weather
with DTC 4148, 51, 52 in in the ABS ECU.
Notes:
1.
Use scan tool to see trouble codes. Or, push brake pedal 10 times in quick succession and watch for code from ABS light on dash.
2.
If ABS light comes ON intermittently in cold weather, codes 41-48, 51, 52 may be set in the ABS ECU. For cars up to 12/94, replace the ECU
with part no. MR260713. For cars after 12/94, use part no. MR260714. (See also TSB-95-35-008).
3.
On 1994 Galant, look for an improperly grounded # 4 ground at the ABS ECU harness behind the front passenger kick panel if the scan tool shows
codes 41-48.
System Type: Mitsubishi Teves 3 channel.
Diagnostic Page References:
1996 Galant Service Manual, Vol. 1, Pages 35B-1 thru 35B-29. Circuit diagrams are in Vol. 2, Pages 132-137.
Data Link Connector Location: Under instrument panel near center. See page 35B-5.
Technical Service Bulletins:
1996 model:
TSB-95-35-008 provides corrective action, part numbers and warranty information for intermittent illumination of ABS light in cold weather with DTC
41-48, 51, 52 in the ABS ECU.
Notes:
1.
Use scan tool to see trouble codes. Or, push brake pedal 10 times in quick succession and watch for code from ABS light on dash.
2.
If ABS light comes ON intermittently in cold weather, codes 41-48, 51, 52 may be set in the ABS ECU. Replace the ECU with part no.
MR260714. (See also TSB-95-35-008).
Mirage - 1993
System Type: Sumitomo Flow Control 4 channel.
Diagnostic Page References: 1993-96 Mirage Service Manual Vol. 1, Pages 35-10 thru 35-40.
Data Link Connector Location: Under instrument panel left side. See page 35-11.
Technical Service Bulletins: None.
Notes:
1.
Use scan tool to see trouble codes.
2.
1993 models require the use of the scan tool adapter harness.
3.
Inspection chart for Diagnostic Trouble Codes (DTC) is on page 35-15.
Montero - 1992-96
System Type: Mitsubishi Multi mode ABS 2/3 channel.
Diagnostic Page References:
