Pickup 2WD L4-2.3L DSL Turbo (1984)
Rocker Arm Assembly: Service and Repair
Camshaft, Camshaft Oil Seal, Rocker Arms & Shaft
Fig. 14 Exploded view of camshaft & bearing caps
1.
Turn crankshaft until No. 1 piston is at top dead center of compression stroke.
2.
Remove parts in numerical order shown in Fig. 14.
Fig. 15 Camshaft endplay
3.
Reverse procedure to install. Calculate endplay by measuring distance A and B, Fig. 15. Subtract measurement A from B. This is endplay.
