mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

4X4 Freewheel Hub - Ratcheting Sound|Page 922 > < Axle Lock Washer - Not Reusable
Page 1
background image

Wheel Hub (Locking): Technical Service Bulletins
4X4 Freewheel Hub - Ratcheting Sound

SUBJECT:

FREEWHEEL HUB "RATCHETING" SOUND
NO.

STB-84-02-002

DATE

September 1984

MODEL 1984 Truck 4WD & 1984 Montero
If a 4WD vehicle with automatic freewheeling front hubs makes a ratcheting sound when in motion, it is possible that the sound is caused by incomplete
engagement of the hub slide gear with the gear teeth in the hub body. (See page 2-35 of the 1984 Truck or Montero Service Manual.)

This condition can be caused by:
^

Cold oil in the transfer case causing the propeller shaft to rotate.

^

Incomplete engagement of the slide gear with the gear teeth in the hub when unlocking the hub.

Corrective actions are tabulated below:

4X4 Freewheel Hub - Ratcheting Sound|Page 922 > < Axle Lock Washer - Not Reusable