Pickup 2WD L4-2350cc 2.4L SOHC 8 Valve (1996)
10.
A monitor indicates that reprogramming is in progress.
There are five phases in the reprogramming process. The VCI will continue with the process automatically. Do not press any key.
Step 1: Saves data to the back-up memory.
Step 2: Erases data in the ECU.
Step 3: Writes new data in the ECU.
Step 4: Verifies the new data is transferred.
Step 5: Erases diagnosis and back-up memory.
11.
The new ECU part number and ROM-ID display.
You must turn the ignition switch to OFF to complete the reprogramming process.
12.
Start the engine and disconnect the MUT-III.
III. Error List
