mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Engine Controls - PCM Reprogramming Procedure|Page 526 > < Engine Controls - PCM Reprogramming Procedure|Page 524
Page 12
background image

Vehicle battery voltage is low

If the battery voltage is below 9.8 V, this error will display for five seconds.

Recharge or replace the battery. Press ENTER to continue.

Download Error

This message displays if:

-

the MUT-III harness is disconnected during
reprogramming

-

the ignition switch is turned off during
reprogramming

-

a communication problem occurs during
reprogramming

-

battery voltage is low

No response from vehicle ECU

This message displays if:

-

the vehicle ECU does not require reprogramming

-

the MUT-III harness is disconnected during reprogramming

-

the ignition switch is off

Checking ECU download error

Engine Controls - PCM Reprogramming Procedure|Page 526 > < Engine Controls - PCM Reprogramming Procedure|Page 524