mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Sensors and Switches - Transmission and Drivetrain > < Control Module, A/T|Locations|Page 3189
Page 1
background image

Control Module: Service and Repair

1.

Disconnect the negative battery cable.

2.

Remove the front drivers seat.

3.

Disconnect the electrical connectors from the Transmission Control Unit.

4.

Remove the screws and remove the TCM.

5.

Reinstall in reverse order.

CAUTION: Do not connect or disconnect the TCM connectors with the negative battery cable connected. A minor spark or voltage surge can damage
the TCM.

 

Sensors and Switches - Transmission and Drivetrain > < Control Module, A/T|Locations|Page 3189