Raider V6-3.7L SOHC (2006)
9. Locate the RH windshield support clip shown in the photo. With the front of the truck elevated water can leak through its mounting hole and drip
onto the intake screen below it.
10. Remove the clip as follows:
NOTE:
Take care not to break the clip (p/n 55276549AA) as it will be reinstalled.
Temporarily removing the clip for this repair will not affect the installed glass.
a. Work through the large opening indicated in the photo.
b. Locate the back of the clip and squeeze the retaining tangs (indicated by arrows in the photo) with needle nosed pliers.
c. While squeezing the tangs use a nylon trim stick (or other suitable tool that will not damage the paint) to pry the clip from the hole.