Raider V6-3.7L SOHC (2006)
10. Remove the clip as follows:
NOTE:
Take care not to break the clip (p/n 55276549AA) as it will be reinstalled.
Temporarily removing the clip for this repair will not affect the installed glass.
a. Work through the large opening indicated in the photo.
b. Locate the back of the clip and squeeze the retaining tangs (indicated by arrows in the photo) with needle nosed pliers.
c. While squeezing the tangs use a nylon trim stick (or other suitable tool that will not damage the paint) to pry the clip from the hole.
NOTE:
Water leaks from the clip hole and drips onto the fresh air intake assembly.
