Raider V6-3.7L SOHC (2006)
NOTE: Headliner for Double Cab model shown. Extended Cab similar.
CAUTION: Be careful not to crease the headliner.
1. Position the headliner (6) in the vehicle through the door opening from which it was removed.
2. Connect the headliner wire harness connector (1) to the center high mounted stop lamp.
3. Raise the rear of the headliner (7) to the roof panel and install the two coat hooks.
4. Raise the front of the headliner to the roof panel and install the sun visor supports (3).
5. Connect the wire harness connector (5) located at the right A-pillar.
6. If equipped, connect the headliner wire harness connector (2) to the inside rear view mirror.
7. If equipped, install the overhead console.
8. Install the sun visors (4).
9. If equipped, install the front dome lamp.
10. Install the A-pillar trim panels.
11. If equipped, install the rear dome lamp.
12. Install the rear jumper seat headrest sleeves in the headliner.
13. Install the rear jumper seat headrests.
