Raider V6-3.7L SOHC (2006)
4. Remove the rear door sill scuff plate.
CAUTION: Keep the inner bottom end of the upper C-pillar trim panel away from the cab back trim panel when removing the upper
C-pillar trim panel to prevent scratching the back trim panel.
5. Remove the upper C-pillar trim panel.
6. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the lower C-pillar trim panel (7) to the C-pillar (1).
7. Remove the screw (6) that secures the lower anchor to the floor panel near the base of the C-pillar.
8. Remove the seat belt (3) from the lower C-pillar trim panel through the slots provided and remove the trim panel.
Double Cab
