mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Body - Water Leak Onto Passenger Side Floorboard|Page 7040 > < Body - Water Leak Onto Passenger Side Floorboard|Page 7038
Page 5
background image

14. Inspect the cowl trim for a loose weatherstrip. If there are small detached sections use a permanent adhesive to re-secure it to the trim. If large

sections are detached replace the entire weatherstrip with a commercially available automotive quality self sticking foam weather stripping tape
(1/4" x 3/8").

15. Reinstall the cowl trim, retest for a water leak as described in steps 1-4, and confirm there is no water leak onto the passenger's floorboard.

16. Lower the vehicle and reinstall the wiper arm assemblies and blower motor. Check that the blower works on all speeds.

WARRANTY INFORMATION

Technical Service Bulletin # 10-42A-004

Date: 100803

Body - Water Leak Onto Passenger Side Floorboard

No: TSB-10-42A-004

DATE: June, 2010 

MODEL: 2006-09 Raider

SUBJECT:
WATER LEAK ON PASSENGER FLOORBOARD

PURPOSE

Customers of some affected vehicles may report a water leak on the passenger side floor. If the vehicle is parked facing uphill during rains or when the
vehicle is washed water can leak past the cowl trim weatherstrip drip through the HVAC air intake and enter the vehicle through the blower motor area.
This Technical Service Bulletin provides instructions to repair this condition.

AFFECTED VEHICLES

2006-2009 Raider

PROCEDURE

1. Refer to Group 55 - Heater Ventilation and Air Conditioner and remove the fan motor.

Body - Water Leak Onto Passenger Side Floorboard|Page 7040 > < Body - Water Leak Onto Passenger Side Floorboard|Page 7038