Raider V6-3.7L SOHC (2006)
g.
The text box will read: "This routine is used to initialize the ECU."
^
Click on the check mark at the bottom of the screen.
h.
The text box will read: "Initialize ESP sensor."
^
Click on the check mark at the bottom of the screen.
i.
The text box will read: "Please verify that the vehicle is stationary, on level ground with the wheels straight and the brake pedal released."
^
Click on the check mark at the bottom of the screen.
j.
The text box will read: "Clearing Rolls Byte. Engine must not be running. Turn off engine and turn ignition to run position."