Raider V6-3.7L SOHC (2006)
9. Remove the anti-rattle clips (1) from the pad (2).
CLEANING
Clean the individual brake components, including the support plate and wheel cylinder exterior, with a water dampened cloth or with brake cleaner.
Do not use any other cleaning agents. Remove light rust and scale from the brake shoe contact pads on the support plate with fine sandpaper.
INSTALLATION
1. Bottom pistons in caliper bore with C-clamp. Place an old brake shoe between a C-clamp and caliper piston.
2. Clean caliper mounting adapter.
3. Install new anti-rattle clips (1) to the brake pads (2).
4. Install inboard brake pad (4) in adapter (1).
5. Install outboard brake pad (2) in adapter (1).
