Raider V6-3.7L SOHC (2006)
Tighten to 16 Nm (21 ft. lbs.).
3. Install the brake line (2) to the axle stud.
4. Install the brake lines (1&3) into the brake hose (2).
5. Lower the vehicle and remove the support.
6. Bleed the brake system.
Tighten to 16 Nm (21 ft. lbs.).
3. Install the brake line (2) to the axle stud.
4. Install the brake lines (1&3) into the brake hose (2).
5. Lower the vehicle and remove the support.
6. Bleed the brake system.