Raider V6-3.7L SOHC (2006)
Cruise Control Vacuum Reservoir: Service and Repair
RESERVOIR - VACUUM
REMOVAL
The vacuum reservoir (2) is attached to the bottom of the windshield wiper cowel panel (1).
1. Remove cowel panel.
2. Disconnect vacuum line (5) at reservoir.
3. The reservoir is attached using three clips. Pry out on clips for removal.
4. Remove reservoir from cowel.
INSTALLATION
1. Position reservoir (2) onto windshield wiper cowel (1).
2. Install three clips (2) to reservoir. Attach reservoir to cowel panel by pushing clips into cowel panel (1).
3. Connect vacuum line (5) to reservoir fitting.
4. Install windshield wiper cowel (1).
