mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Thermostat, Engine Cooling|Description and Operation|Page 1769 > < Temperature Warning Lamp/Indicator, Engine Cooling|Description and Operation
Page 1
background image

Thermostat: Description and Operation

THERMOSTAT - ENGINE COOLANT

DESCRIPTION 

CAUTION:  Do not operate an engine without a thermostat, except for servicing or testing.

The thermostat is a wax pellet driven, reverse poppet choke type. 

Coolant leakage into the pellet container will cause the thermostat to fail in the open position. Thermostats very rarely stick. Do not attempt to free a
thermostat with a prying device. 

The same thermostat is used for winter and summer seasons. An engine should not be operated without a thermostat, except for servicing or testing.
Operating without a thermostat causes longer engine warm-up time, unreliable warm-up performance, increased exhaust emissions and crankcase
condensation that can result in sludge formation.

OPERATION 

The wax pellet is located in a sealed container at the spring end of the thermostat. When heated, the pellet expands, overcoming closing spring tension
and water pump pressure to force the valve to open.

Thermostat, Engine Cooling|Description and Operation|Page 1769 > < Temperature Warning Lamp/Indicator, Engine Cooling|Description and Operation