Raider V6-3.7L SOHC (2006)
6.
Remove the lash adjuster from container B. Then gently push down the steel ball and push the plunger to remove the diesel fuel from its pressure
chamber.
7.
Place the lash adjuster in container C. Then gently push down the internal steel ball using a stiff wire (0.5 mm).
Do not use container C for cleaning. Foreign matter could enter the pressure chamber.
8.
Stand the lash adjuster upright with its plunger at the top, then push the plunger downward firmly until it moves through its furthest possible
stroke. Return the plunger slowly, then release the steel ball and allow the pressure chamber to fill with diesel fuel.
9.
Remove the lash adjuster from container C and stand it upright with its plunger at the top. Push the plunger firmly and check that it does not move.
If the lash adjuster contracts, repeat Steps 7 through 9 to fill it completely with diesel fuel. If it contracts again, replace it.
10.
Stand the lash adjuster upright to prevent the diesel fuel from spilling out. Do not allow it to become contaminated by dirt or other foreign
substances. Install it in the engine as soon as possible.
WARRANTY INFORMATION
Standard warranty procedures apply. Use the appropriate "Auto Lash Adjuster Cleaning" labor operation code.
