Raider V6-3.7L SOHC (2006)
Condenser HVAC: Service and Repair
REMOVAL
WARNING: REFER TO THE APPLICABLE WARNINGS AND CAUTIONS FOR THIS SYSTEM BEFORE PERFORMING THE
FOLLOWING OPERATION FAILURE TO FOLLOW THE WARNINGS AND CAUTIONS COULD RESULT IN POSSIBLE PERSONAL
INJURY OR DEATH
1. AIR DAM
2. A/C CONDENSER/TRANSMISSION OIL COOLER ASSEMBLY
3. P/ COOLER
4. MOUNTING BOLT
1. Recover the refrigerant from the refrigerant system.
2. Disconnect and isolate the negative battery cable.
NOTE: It is not necessary to remove the hood latch from the upper radiator support when servicing the A/ C condenser.
3. Remove the upper radiator support and position it out of the way.
4. Disconnect the A/C discharge line and the A/C liquid line from the tapping blocks (1) located on the right end of the A/C condenser (2).
5. Remove the screws that secure the power steering cooler (3) to the A/C condenser and position the cooler out of the way.
6. Remove the four bolts (4) that secure the A/C condenser to the radiator (5).
7. Carefully push the radiator rearward and lift the A/ C condenser out of the engine compartment.
