mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Audible Warning Device|Testing and Inspection > < Audible Warning Device|Description and Operation|Page 7130
Page 3
background image

continuously for 11.6 kilometers (mile) with the vehicle speed greater than 22 kilometers-per-hour (15 miles-per hour). Vehicles built for
markets other than the United States and Canada have a revised distance threshold of 4 kilometers for this feature. The chime will continue until
the turn signal input becomes inactive or until the vehicle speed message indicates that the speed is less than 22 kilometers-per-hour (15
miles-per-hour)
, whichever occurs first. The hazard warning flashers will not activate this chime feature.

-

Warning Indicator Announcement - The EMIC transducer will generate one short chime each time the check gauges indicator is illuminated by
the instrument cluster circuitry. The check gauges indicator may be illuminated when any critical engine or transmission systems are operating
outside of their normal parameters. The instrument cluster monitors electronic messages received over the CAN data bus to determine when to
illuminate the check gauges indicator.

The EMIC provides chime service for all available features in the chime warning system. The EMIC relies upon its internal programming, numerous
hard wired inputs, and electronic message inputs received from other modules over the CAN data bus network to provide the chime warning system
features. The internal programming of the EMIC determines the priority of each chime request input that is received, as well as the rate and duration of
each chime that is to be generated.

The hard wired chime warning system inputs to the EMIC may be diagnosed and tested using conventional diagnostic tools and procedures. However,
conventional diagnostic methods may not prove conclusive in the diagnosis of the EMIC, the CAN data bus, or the electronic messages received by the
EMIC from other modules. The most reliable, efficient and accurate means to diagnose the EMIC, the CAN data bus, or the electronic message inputs
used for the chime warning system requires the use of a diagnostic scan tool. Refer to the appropriate diagnostic information.

Audible Warning Device|Testing and Inspection > < Audible Warning Device|Description and Operation|Page 7130