Raider V6-3.7L SOHC (2006)
1. Position the A/C discharge line (2) into the engine compartment.
2. Remove the tape or plugs from the opened discharge line fittings and the condenser and compressor ports
3. Lubricate new rubber O-ring seals with clean refrigerant oil and install them and new gaskets onto the discharge line fittings. Use only the
specified O-ring as it is made of a special material for the R-134a system. Use only refrigerant oil of the type recommended for the A/C
compressor in the vehicle.
4. Install the A/C discharge line to the A/C compressor.
5. Install the nut (1) that secures the A/C discharge line to the A/C compressor. Tighten the nut to 23 N.m (17 ft. lbs.).
6. Install the A/C discharge line to the A/C condenser (4).
7. Install the nut (3) that secures the A/C discharge line to the A/C condenser. Tighten the nut to 20 N.m (15 ft. lbs.).
8. Reconnect the negative battery cable.
9. Evacuate the refrigerant system.
10. Charge the refrigerant system.
