Raider V6-3.7L SOHC (2006)
A window will pop up prompting you to turn the key ON within 20 seconds.
After turning the key ON, you will be taken to the next screen. Be patient as this takes some time.
14. This screen will display. Note the new part number (2006 50S V8 2WD spec part # shown) and confirm it matches the part number from the chart at
the end of this TSB for the vehicle's specification.
15. Click on the check mark in the window to continue.
16. Click on the "UP" arrow at the bottom left of the screen to return to the SPECIAL FUNCTIONS menu.
Clear all DTCs as follows:
1. From the Special Functions menu, select All DTCs. The MUT-III will check for DTCs in all ECUs and display them. This may take a few minutes.
