Raider V6-3.7L SOHC (2006)
11. Select the programming database (calibration) listed in the "New ECU P/N" column that matches the "New S/W Part #" column from the chart at the
end of this TSB.
Click on the check mark at the bottom of the screen.
12. Click on the check mark to continue with reprogramming. It will take up to 10 minutes to complete reprogramming.
DO NOT DISTURB THE HARNESS CABLES OR CONNECTIONS. INTERRUPTION DURING PROGRAMMING REQUIRES THE PROCESS
TO BE RESTARTED.
DO NOT SHUT DOWN THE RAIDER STV PROGRAM AT THIS POINT. ECU DAMAGE WILL OCCUR. FOLLOW THE MUT-III SCREEN
DISPLAY MESSAGES TO RESTART THE PROGRAMMING PROCESS.
NOTE:
When PCM reprogramming is completed, TCM reprogramming will start automatically.
13. When programming is complete, this screen will display. Turn the ignition key off.
