mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Power Distribution Module|Locations > < Parking Lamp Relay|Locations|Page 188
Page 1
background image

Power Distribution Module: Technical Service Bulletins
Powertrain - No Crank, No Start, No Dash Lights

No: TT-123-13-01
DATE: February 2006
MODEL: See Below

SUBJECT
NO ENGINE CRANK / NO START /
NO DASH LIGHTS

No Engine Crank/No Start/No Dash Lights - 2006 Raider. This condition may be caused by misalignment of one of the connectors underneath the Power
Distribution Center (PDC). Remove the plastic screws securing the PDC to access the connectors. (NOTE: Tab underneath locking bar must be
depressed before pushing down on locking bar.) Inspect C3, C4 and C5 for bent pins. Straighten the bent pins, then reinstall the PDC, making sure the
connectors are drawn up evenly and pushed squarely into their sockets before ratcheting down on the locking bar.

Power Distribution Module|Locations > < Parking Lamp Relay|Locations|Page 188