Raider V6-3.7L SOHC (2006)
Double cab models are equipped with a fixed-position child restraint upper tether anchor strap for the rear center and both rear outboard seating
positions (2), and child restraint lower anchors for both rear outboard seating positions (1). All front seat child restraint anchors are deleted on double
cab models. The extended cab right outboard front seat upper tether anchor (3) is integral to the front seat cushion (2) frame. This anchor is constructed
from round steel bar stock that is formed into a loop, then securely welded at each end to the seat cushion frame. It is accessed from behind the front seat,
just below the seat back (1). This anchor cannot be adjusted or repaired and, if faulty or damaged, it must be replaced as a unit with the seat cushion
frame.
