Raider V6-3.7L SOHC (2006)
The extended cab right outboard front seat lower anchors (2) are also integral to the front seat cushion frame. These lower anchors are each constructed
from round steel bar stock that is formed into a loop, then securely welded at each end to the seat cushion frame. They are each accessed from the front
of the seat, at each side where the seat back (1) meets the seat cushion (3). These lower anchors cannot be adjusted or repaired and, if faulty or damaged,
they must be replaced as a unit with the seat cushion frame.
The two rear seat upper tether straps and center anchor for extended cab models are secured to the upper cab back panel reinforcement with screws and
are concealed behind the cab back trim (3). The outboard tether straps are accessed by folding down the upper rear seat back pads (1), while a hinged
access door (2) is opened to access the center anchor. These upper tether straps and the anchor are available for individual service replacement.
