Raider V6-3.7L SOHC (2006)
Sunroof / Moonroof Switch: Description and Operation
Switch - Sunroof
SWITCH - SUNROOF
DESCRIPTION
The power sunroof switch is a combination push-button and rocker switch module mounted in the overhead console. The sunroof switch is a direct
contact unit that is directly wired to the sunroof motor/module assembly. The sunroof switch performs the following functions:
-
Power sunroof open (back of switch pushed)
-
Power sunroof closed (front of switch pushed)
-
Power sunroof vent (switch center button pushed)
OPERATION
The power sunroof switch is hard wired to the sunroof motor/module assembly. The switch receives battery current from the motor/module when the
ignition switch is in the RUN and ACCESSORY positions or the vehicle Accessory Delay System is active.
When one of the switch positions is pressed it sends battery current back to the motor/module, signaling it to move the power sunroof to the appropriate
position. The motor/module will perform one of the following functions:
-
Power sunroof open (back of switch pushed)
-
Power sunroof closed (front of switch pushed)
-
Power sunroof vent (switch center button pushed)
