mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Sensors and Switches - Brakes and Traction Control > < Sunroof / Moonroof Switch|Flow of Diagnosis|Page 522
Page 1
background image

Sunroof / Moonroof Switch: Service and Repair

SUNROOF CONTROL SWITCH - REMOVAL

1. Disconnect and isolate the negative battery cable.
2. Remove the overhead console from the headliner.
3. Disconnect the sunroof control switch electrical connector. Depress the connector retaining tab and pull the connector straight out.
4. To remove the switch from the overhead console, push on the back of the switch until it comes free from the overhead console.

SUNROOF CONTROL SWITCH - INSTALLATION

1. Install the switch in the overhead console assembly. Be certain the switch is securely snapped in place.
2. Connect the sunroof control switch electrical connector. Be certain the switch connector is securely snapped in place.
3. Install the overhead console.
4. Connect the negative battery cable.

Sensors and Switches - Brakes and Traction Control > < Sunroof / Moonroof Switch|Flow of Diagnosis|Page 522