Raider V6-3.7L SOHC (2006)
2. If DTCs are listed, click on the erase button at the bottom of the screen.
Any DTCs listed will be erased and rechecked to see if they return.
NOTE:
It is not uncommon for DTCs to be set in the PCM or other control units during reprogramming.
3. Verify no DTCs are listed. If there are, diagnose per the Service Manual.
Click on the "Home" icon to return to the main page.
4. the reprogramming procedure is complete. Turn the ignition to the "OFF" position and disconnect the MUT-III.
5. Use a permanent ball-point pen to enter the new S/W part number, your dealer code, this TSB number (TSB-09-13-009) and the current date on the
Engine Compartment / Control Module Label (part no. MSSF024G00).
6. Carefully remove all dirt and oil from a vacant area near the VECI label, and affix the Engine Compartment label.
