Raider V6-3.7L SOHC (2006)
NOTE:
Special tool 8823, Generator shaft holder, is not an essential tool and can be purchased from SPX by calling (888) 727-6672. For more information,
go to the special tools website by clicking on the link from the Mitsubishi Dealer Link (MDL).
7.
Install the plastic insulator cap on the pulley.
8.
Reinstall the alternator:
-->a. Install the two horizontal bolts and one vertical bolt. Tighten the long horizontal and the vertical mounting bolts to 55 Nm (40 ft/lbs) and tighten
the short horizontal mounting bolt to 74Nm (55 ft/lbs).
b.
Install the field wire connector into the rear of the alternator.
c.
Install the B+ terminal eyelet to the alternator output stud. Tighten the mounting nut to 12 Nm (108 in/lbs).
9.
Reinstall the accessory drive belt.
10.
Reconnect the negative battery cable and reprogram the radio presets.
PARTS INFORMATION
WARRANTY INFORMATION