Raider V6-3.7L SOHC (2006)
12. Remove the hub/bearing bolts (2) from the knuckle (1).
13. Remove the hub/bearing from the steering knuckle.
14. Remove the steering knuckle (1).
INSTALLATION
CAUTION: The ball joint stud tapers must be CLEAN and DRY before installing the knuckle. Clean the stud tapers with mineral spirits to remove
dirt and grease.
1. Install the hub/bearing to the steering knuckle and tighten the bolts (1) to 163 Nm (120 ft. lbs.).