Raider V6-3.7L SOHC (2006)
Power Steering Line/Hose: Service and Repair
Return Hose - Gear to Cooler
RETURN HOSE - GEAR TO COOLER
REMOVAL
1. Siphon the power steering system.
2. Raise and support the vehicle.
3. Disconnect the return hose (6) at the gear (7).
4. Disconnect the return hose (6) at the cooler (1).
5. Remove the return hose from the vehicle.
INSTALLATION
1. Install the return hose to the vehicle.
2. Reconnect the return hose (6) at the cooler (1) with hose clamps.
3. Reconnect the return hose (6) at the gear (7).
Tighten the tube nut to 37 Nm (27 ft. lbs.).
4. Route the return hose and secure.
5. Remove the support and lower the vehicle.
6. Refill the power steering system.
