Raider V6-3.7L SOHC (2006)
7. Remove the steering coupling shaft (3) from the vehicle.
INSTALLATION
1. Install the upper steering coupling shaft (3) to the vehicle.
NOTE: A new steering coupling shaft pinch bolt for the upper and lower shafts must be used.
2. Install the upper coupling (7) to the column (1).
3. Install the upper pinch bolt (2) use a new bolt and tighten to 38 Nm (28 ft. lbs.).
4. Install the toe plate (5) nuts (6) and tighten to 12 Nm (105 inch lbs.).
5. Install the shaft (1) to the lower coupling (2).
6. Install the lower pinch bolt (4) use new bolt and tighten to 38 Nm (28 ft. lbs.).
7. Unlock the steering wheel.
8. Reconnect the negative battery cable.