Raider V6-3.7L SOHC (2006)
Suspension Spring ( Coil / Leaf ): Service and Repair
Front Suspension
SPRING
REMOVAL
1. Remove the shock.
2. Install the shock assembly in the Branick 7200 spring removal/installation tool or equivalent (1).
3. Compress the spring (2).
4. Position shock nut wrench 9362 (2), on shock shaft retaining nut. Next, insert 8 mm socket though Wrench onto hex located on end of shock shaft.
While holding shock shaft from turning, remove nut from shock shaft using Wrench.
5. Remove the upper shock nut.
6. Remove the shock.
7. Remove the shock upper mounting plate.
8. Remove and inspect the upper and lower spring isolators.
