Raider V6-3.7L SOHC (2006)
12. Shut engine OFF and place ignition key to the unlocked OFF position.
13. Shift automatic transmission into Park (P).
14. Attach vehicle to tow vehicle with tow bar.
NOTE: Items 1 through 5 are requirements that must be met prior to depressing the Neutral (N) selection button, and must continue to be met
until the 4 seconds elapses and the shift has been completed. If any of these requirements (with the exception of 3 - Key ON) are not met prior to
depressing the Neutral (N) button or are no longer met during the 4 second timer, then the Neutral (N) indicator light will flash continuously until
all requirements are met or until the Neutral (N) button is released.
NOTE: The ignition key must be ON for a shift to take place and for the position indicator lights to be operable. If the key in not ON, the shift
will not take place and no position indicator lights will be on or flashing.
NOTE: Flashing neutral (N) position indicator light indicates that shift requirements have not been met.
CAUTION: Damage to the transmission may occur if the transmission is shifted into Park (P) with the transfer case in Neutral (N) and the engine
RUNNING. With the transfer case in Neutral (N) ensure that the engine is OFF prior to shifting the transmission into Park (P).
Shifting OUT of Neutral (N)
Use the following procedure to prepare your vehicle for normal usage.
1. Bring vehicle to a complete stop.
2. Shut engine OFF.
3. Place ignition key in the ON position.
4. Depress brake pedal.
5. Shift automatic transmission to Neutral (N) or depress clutch on manual transmission.
6. Using the point of a ballpoint pen or similar object, depress the recessed transfer case Neutral (N) button for 1 second.
7. After the Neutral (N) indicator light turns off release the Neutral (N) button.
8. After the Neutral (N) button has been released the transfer case will shift to the position identified by the selector switch.
9. Shift automatic transmission into Drive (D), release the clutch on manual transmission.
NOTE: Items 1 through 5 are requirements that must be met prior to depressing the Neutral (N) selection button, and must continue to be met
until I second elapses and the shift has been completed. If any of these requirements (with the exception of 3 - key ON) are not met prior to
depressing the Neutral (N) button or are no longer met during the I second time, then all of the mode position indicator lights will flash
continuously until all requirements are met or until the Neutral (N) button is released.
NOTE: The ignition key must be ON for a shift to take place and for the position indicator lights to be operable. If the key is not ON, the shift
will not take place and no position indicator lights will be on or flashing.
NOTE: Flashing neutral (N) position indicator light indicates that shift requirements have not been met.
CAUTION:
-
Do not use a bumper mounted clamp-on tow bar on your vehicle. The bumper face bar will be damaged.
-
Do not disconnect the rear driveshaft because fluid will leak from the transfer case and damage internal parts.
