Raider V6-3.7L SOHC (2006)
Valve Body: Service and Repair
Automatic Transmission 42RLE
Removal
REMOVAL
NOTE: If valve body is being reconditioned or replaced, it is necessary to perform the Quick Learn Procedure.
1. Disconnect the transmission range sensor (5) solenoid/pressure switch assembly wiring connectors.
2. Disconnect the variable line pressure connector (4), if equipped.
3. Disconnect the shift cable from the shift lever (at the transmission).
4. Move the manual shift lever clockwise as far as it will go. This should be one position past the position. Then remove the manual shift lever.
NOTE: One of the oil pan bolts has a sealing patch-applied from the factory. Separate this bolt for reuse.
