Raider V6-3.7L SOHC (2006)
18. Install the variable line pressure header onto the manual shaft (5).
19. Install the shoulder screw (3) to hold the variable line pressure header (4) to the valve body.
20. Install the pressure control solenoid and line pressure sensor into the valve body.
21. Install the screws (6) to hold the pressure control solenoid (1) and line pressure sensor (2) to the valve body.
22. Install the electrical connectors to the pressure control solenoid (1) and the line pressure sensor (2).
Installation
INSTALLATION
1. Install valve body into position and start bolts (Torque valve body to transmission case bolts (1) to 12 Nm (105 inch lbs.) torque.
