Raider V6-3.7L SOHC (2006)
^
2WD SHIFT LIMIT - During Phase 2 and Phase 3 shifting, shifts may become unidirectional when a voltage is greater than or equal to
encoder-2WD-min Volts has been reached.
The mode sensor position will be considered invalid by the FCM if the voltage is greater than or equal to encoder - High_Range - Limit Volts or if it is
less than or equal to encoder - Low - Range_Limit Volts.
Refer to MODE SENSOR VOLTAGES <NV233> table for the mode sensor voltages.
MODE SENSOR VOLTAGES <NV233>
MODE SENSOR VOLTAGES <NV233>
